Skip to main content

Articles

Page 1 of 1

  1. In this paper, the accuracy and the convergence properties of Trefftz finite element method over arbitrary polygons are studied. Within this approach, the unknown displacement field within the polygon is repre...

    Authors: Hirshikesh, S. Natarajan, R. K. Annabattula, S. Bordas and E. Atroshchenko
    Citation: Asia Pacific Journal on Computational Engineering 2017 4:3

    The Erratum to this article has been published in Asia Pacific Journal on Computational Engineering 2017 4:4

  2. The focus of this work is to theoretically investigate the problem of double stratification on heat and mass transfer in an unsteady hydromagnetic boundary layer flow of a nanofluid over a flat surface. The mo...

    Authors: Winifred Nduku Mutuku and Oluwole Daniel Makinde
    Citation: Asia Pacific Journal on Computational Engineering 2017 4:2
  3. The concept of information science is inevitable in the human development as science and technology has become the driving force of all economics. The connection of one human being during epidemics is vital an...

    Authors: Ebenezer Bonyah, Abdon Atangana and Muhammad Altaf Khan
    Citation: Asia Pacific Journal on Computational Engineering 2017 4:1
  4. Cryptosporidium is associated with waterborne transmission mechanism through the faecal–oral path in many recreational water facilities. We investigate the probable approximate solution of integer and noninteg...

    Authors: Ebenezer Bonyah, Abdon Atangana, Kazeem Okosun and Muhammad Altaf Khan
    Citation: Asia Pacific Journal on Computational Engineering 2016 3:2
  5. An overview of plastic-hinge model for steel frames under static loads is carried out in this paper. Both rigid-plastic and elastic-plastic methods for framed structures are reviewed, including advantages and ...

    Authors: Van-Long Hoang, Hung Nguyen Dang, Jean-Pierre Jaspart and Jean-François Demonceau
    Citation: Asia Pacific Journal on Computational Engineering 2015 2:4
  6. A hyperelastic model must not only characterize the mechanical response of a composite material such as soft tissue, but also ensure numerical stability by a feasible set of material parameters. Apart from the...

    Authors: Minh Tuan Duong, Nhu Huynh Nguyen and Manfred Staat
    Citation: Asia Pacific Journal on Computational Engineering 2015 2:3
  7. In this article, a technique is proposed for obtaining better and accurate results for nonlinear PDEs. We constructed abundant exact solutions via exp http://static-content.springer.com/image/art%3A10.1186%2Fs40540-015-0014-y/40540_2015_14_Article_IEq2.gif

    Authors: Syed Tauseef Mohyud-Din, Ayyaz Ali and Muhammad Asad Iqbal
    Citation: Asia Pacific Journal on Computational Engineering 2015 2:2
  8. In this work, a full-field finite element simulation of a heterogeneous DC04 steel microstructure identified from two-dimensional (2D) electron backscatter diffraction (EBSD) data is performed under a macrosco...

    Authors: Tung Van Phan
    Citation: Asia Pacific Journal on Computational Engineering 2014 1:10
  9. Simulation of pressure-induced fracture in two-dimensional (2D) and three-dimensional (3D) fully saturated porous media is presented together with some peculiar features.

    Authors: Stefano Secchi and Bernhard A Schrefler
    Citation: Asia Pacific Journal on Computational Engineering 2014 1:8
  10. The paper presents a numerical procedure for kinematic limit analysis of Mindlin plate governed by von Mises criterion.

    Authors: Nguyen-Thoi Trung, Phung-Van Phuc and Le-Van Canh
    Citation: Asia Pacific Journal on Computational Engineering 2014 1:6

    The Retraction Note to this article has been published in Asia Pacific Journal on Computational Engineering 2015 2:1

  11. In the framework of periodic homogenization, the conduction problem can be formulated as an integral equation whose solution can be represented by a Neumann series. From the theory, many efficient numerical co...

    Authors: Quy Dong To and Guy Bonnet
    Citation: Asia Pacific Journal on Computational Engineering 2014 1:5
  12. This paper develops a new finite element method (FEM)-based upper bound algorithm for limit and shakedown analysis of hardening structures by a direct plasticity method. The hardening model is a simple two-sur...

    Authors: Phú Tình Phạm and Manfred Staat
    Citation: Asia Pacific Journal on Computational Engineering 2014 1:4
  13. It is well known that the vibration of washing machines is a challenging issue to be considered. This research work focuses on the optimal design of a flow-mode magneto-rheological (MR) damper that can replace...

    Authors: Quoc Hung Nguyen, Ngoc Diep Nguyen and Seung Bok Choi
    Citation: Asia Pacific Journal on Computational Engineering 2014 1:3
  14. This work presents an approach to solve inverse problems in the application of water quality management in reservoir systems. One such application is contaminant cleanup, which is challenging because tasks suc...

    Authors: Ngoc-Hien Nguyen, Boo Cheong Khoo and Karen Willcox
    Citation: Asia Pacific Journal on Computational Engineering 2014 1:2